A call cycle is the planned interval between visits to a customer. To set one, rank your accounts by value and potential into tiers, give each tier a visit frequency such as weekly, every other week or every fourth week, check the total against what your reps can cover, then build the cycle into repeating routes.
How often should sales reps visit customers? There is no universal number. A customer who buys $2,000 a week needs more visits than one who buys $2,000 a year, and a customer who could buy ten times more deserves more attention than its current orders suggest. The method below gets you a defensible answer for each account, and an arithmetic check that your team can deliver it.
Why a call cycle beats visiting by feel
Without a cycle, reps visit the customers they like, the ones nearby and the ones who complained last. The big quiet account in the far corner of the territory falls off. Nobody notices until the orders drop. A written cycle fixes three things.
- Fairness to the customer. Every account knows when it will see someone, and gets the attention its size earns.
- Fairness to the rep. The rep's week has a number of visits that can be finished, not a wish list.
- Visibility for the manager. A missed visit is a gap against a plan, so you can see it. Without a plan, a gap has nothing to be measured against.
Step 1: Tier your accounts by value and potential
Sort every account into A, B or C. Two numbers do most of the work. Value is what the account bought in the last 12 months, taken from your invoice export. Potential is what it could buy if it gave you its full share: a restaurant with six locations that buys for one, a contractor who buys half their tile elsewhere. Reps know potential. The invoices don't.
| Score | Value: last 12 months | Potential: share of their spend you hold |
|---|---|---|
| 3 points | Top 10 percent of your accounts by sales | Under a third, and room to grow |
| 2 points | Next 30 percent | A third to two thirds |
| 1 point | The remaining 60 percent | Over two thirds, or little more to sell |
Add the two scores. An account with 5 or 6 points is an A. An account with 3 or 4 is a B. An account with 2 is a C. Then read the list and override any placement that's plainly wrong. A new customer who just opened a second site may deserve an A for a quarter, whatever the score says.
Step 2: Assign a frequency to each tier
Frequency follows three things: how fast the customer uses what you sell, how much each visit can change the order, and how much a visit costs you in drive time. Here are three starting patterns. Pick the one nearest to your business and adjust.
| Business type | A accounts | B accounts | C accounts |
|---|---|---|---|
| Food and beverage, fast reorder | Every week | Every other week | Every fourth week |
| Building materials, tile and stone | Every other week | Every fourth week | Every month, or phone in between |
| Industrial or medical supply, slower reorder | Every fourth week | Every month | Phone and email, one visit a quarter |
These are examples built to show the shape. A bar with a weekly delivery may need a visit every week, while an industrial supplier with a slow-moving catalog might see an A account every fourth week and be right. Test your cycle against how often the customer actually reorders. Route sales teams that sell and deliver from the truck run the same cycle on a tighter clock; see direct store delivery.
Give each visit a job
A cycle slot with no purpose turns into a social call. Write one line for each tier. An A visit might be to review stock, take the order and ask what the customer's own customers are asking for. A C visit might be to check that nothing has changed and leave new product information. If a visit has no job, lengthen the interval or switch to the phone.
Step 3: Check the cycle against what a rep can cover
A plan nobody can deliver is worse than no plan, because everyone learns to ignore it. Before you commit, add up the visits.
| Tier | Accounts | Cycle | Visits per week |
|---|---|---|---|
| A | 10 | Every week | 10 |
| B | 20 | Every other week | 10 |
| C | 40 | Every fourth week | 10 |
| Total | 70 | 30 |
Thirty visits a week is six a day for five days. That is a full week with no room for a problem visit or a prospect. If your reps average six visits a day when they are working well, leave 10 to 20 percent of the week free, which means planning 24 to 27 visits and not 30. To get there, move some C accounts to every month or to the phone, or give the territory to a second rep.
Step 4: Build the cycle into repeating routes
The cycle is only a plan until it lands in a route. The tidy way is to split each tier into groups that fall in different weeks, so every week has the same number of visits. In the example, the 20 B accounts become two groups of 10, one seen in odd weeks and one in even. The 40 C accounts become four groups of 10, one for each week of a four-week rotation.
| Week | A accounts (10) | B accounts | C accounts |
|---|---|---|---|
| Week 1 | All 10 | Group B1, 10 accounts | Group C1, 10 accounts |
| Week 2 | All 10 | Group B2, 10 accounts | Group C2, 10 accounts |
| Week 3 | All 10 | Group B1 | Group C3, 10 accounts |
| Week 4 | All 10 | Group B2 | Group C4, 10 accounts |
Now cluster by geography. Within each group, put accounts that are near each other on the same day, and order the stops so the drive starts short from where the rep begins. If two groups of C accounts are far apart, swap accounts between groups until each group is compact. A little reshuffling here saves hours of windshield time every month, and the same logic drives how you draw a sales territory plan.
Weekly, every fourth week and monthly are different
Every fourth week is a 28-day rhythm, so it comes round 13 times a year. A monthly route comes round 12 times. For most accounts the gap doesn't matter. For a C account you are trying to protect, every fourth week gives you one more visit a year, which is worth knowing when you choose between them.
Step 5: Review the tiers every month
Tiers go stale. An account grows, a competitor takes half of another, a buyer leaves. Put a monthly review in the manager's calendar and use two sources.
- The invoice export. Which accounts are buying less than usual, and which large ones nobody has seen lately? Move a slipping account up a tier for a few cycles.
- The reps' notes. A note that says the owner is opening a second location is a reason to promote the account before the invoices show it.
When you move an account, change its cycle and say why in the note, so the next manager sees the reason. In Sales Perch, uploading the invoice export adds those accounts to each rep's week, so the route planner doesn't depend on anyone's memory.
Put prospects into the cycle
A cycle built only from customers never grows. Prospects need slots in it, or they get visited on the rare day a customer cancels. Three decisions cover it: how often to revisit a prospect, how many prospect slots to hold each week, and when to drop one.
How often to revisit a prospect
Tie the interval to what is open with the prospect, not to a size tier you cannot yet score. The table gives starting points to adjust after a quarter of your own results.
| Prospect state | Revisit | Job of the visit |
|---|---|---|
| First visit done, a quote or sample is open | Within one week | Get an answer on the quote or sample while it is fresh |
| Warm: a contact is engaged and there is a next step | Every other week | Move the next step forward and meet the person who decides |
| Cool: no decision date, slow replies | Every fourth week, or a call in between | Check whether anything has changed, and leave something useful |
How many prospect slots to hold each week
Use the room you left in Step 3. In the example, 30 visits a week are needed and the plan holds 24 to 27, which leaves 3 to 6 free. Hold three of them for prospects, and keep them as fixed slots in the route, not as gaps that a problem visit eats.
When to drop a prospect
A prospect that never moves holds a slot that a better one could use. Set the drop rules in advance, so the decision is not made on a bad day.
- Three visits with no movement. If the next step has not moved after three visits, move the prospect to a call every quarter.
- A clear no with a reason that will not change. A long contract with a competitor is an example. Note the contract end date and revisit then.
- No decision-maker found after two tries. Ask the person you met who decides. If nobody will say, change the interval.
- The prospect becomes a customer. Score it with the grid in Step 1. Treat it as a B for its first two cycles, then let the score decide.
Dropping a prospect does not mean deleting it. Move it to a longer interval or a phone list, and write the reason in the note. Review the prospect list at the same monthly meeting as the tiers, and replace each dropped prospect with a new one so the slots stay full.
Mistakes that break a call cycle
- Tiering by size alone. A small account with large potential is a B or an A for a while.
- Planning more visits than the week holds. The first thing to go is the C group, and then nobody sees them.
- Stacking every account on week one. Spread groups across the rotation so no week is overloaded.
- Setting it and forgetting it. Review monthly, or tiers drift from reality.
- Counting a phone call as a visit. If you want phone contact in the cycle, label it as a call so your numbers stay honest.
Your call cycle sheet
Copy this, fill it in for one rep, and run it for a month. Then compare the visits made with the visits planned. If the gap is large, the cycle is too ambitious or the territory is too big. What is field sales explains how to run that weekly review across a whole team.
Rep: ______ Territory: ______ Accounts: ______ A accounts (value + potential 5 to 6): ____ accounts, cycle: every ____, job of the visit: ______ B accounts (3 to 4): ____ accounts, cycle: every ____, job of the visit: ______ C accounts (2): ____ accounts, cycle: every ____, job of the visit: ______ Visits needed per week = A / weeks + B / weeks + C / weeks = ____ Visits a rep can make per week, less 10 to 20 percent: ____ Gap: ____. Fix by: longer cycle for C / phone for C / second rep / smaller territory Groups: B1, B2, C1, C2, C3, C4 listed with their accounts and nearest cluster Review date each month: ______ Accounts moved up or down: ______
Once the sheet is filled in, each group becomes a repeating route. The field sales CRM keeps each customer's visits and notes with the account, so the next rep, or the same rep a month later, starts with the history.
